HE2XRT
 |
- Outdoor Fan Powered Packaged Energy Recovery Ventilator
- Typical Airflow Range: 500-2,000 cfm
- AHRI 1060 Certified Core – Two L125-G5
- Belt Driven 1.5 or 2.0 hp motors (2)
- Available in single or three phase with multiple voltage options including 575V
- Available airflow orientations: RTV, RTF, RTR, RTH
|
Standard Features:
- Utilizes RenewAire's exceptional static plate energy exchange core
- AHRI certified performance data for efficiency and cross leakage
- Ten year core performance warranty
- Suitable for restroom exhaust
- No liquid water (condensate) or accompanying drain line to deal with - as with many competing brands
- Hinged and latched access door to ERV core with airtight outdoor exposure compression seals
- Built-in pressure ports with captive plugs allowing cross-core pressure measurement and accurate airflow measurement
- Second similarly constructed access door allows access to blower compartment and all other internal components
- Screened weatherhoods to exclude birds and animals
- Low velocity intake hood with aerodynamic rain excluder
- G90 galvanized, 20-gauge steel construction with lapped corners and zinc plated screw fasteners
- One inch thick dense fiberboard insulation with scrimmed foil facing – washable, durable and easy to maintain – no loose insulation fibers to break off and enter the airstreams
- Factory installed, integral line voltage disconnect (non-fused) and onboard 24VAC power
- Totally enclosed, premium efficiency, EISA compliant motors for energy efficiency with factory installed motor starters
- Four total, MERV 8, 2" pleated, 20"x20" nominal size filters (two for each airstream)
- UL tested flammability and smoke generation that meets NFPA 90A and 90B test standards for commercial applications
Available Options:
- Fused disconnect
- Double wall construction
- Factory supplied and mounted Variable Frequency Drives (VFDs) – one or both airstreams
- Motorized isolation dampers - OA, EA or both airstreams
- Factory mounted Filter Alarms (2)
- Exterior paint – white standard – custom colors available
EV450IN
 |
- Indoor Fan Powered Packaged Energy Recovery Ventilator
- Typical Airflow Range: 200-540 cfm
- AHRI 1060 Certified Core – One L85-G5
- Direct drive 0.6hp (Single Phase) or 0.5hp (Three Phase) motor (1)
- Compact design meets tight architectural requirements.
- Available in single or three phase with multiple voltage options
|
|
Standard Features:
- Utilizes RenewAire's exceptional static plate energy exchange core
- AHRI certified performance data for efficiency and cross leakage
- Ten year core performance warranty
- Suitable for restroom exhaust
- No liquid water (condensate) or accompanying drain line to deal with - as with many competing brands
- No mounting restrictions - mount overhead, on a wall – vertical or horizontally
- Integral mounting flanges
- Access doors can be completely and easily removed allowing complete access to all internal components
- Two separate access doors, one for the core, the other for the blower compartment
- Built-in pressure ports with captive plugs allowing cross-core pressure measurement and accurate airflow measurement
- One inch thick dense fiberboard insulation with scrimmed foil facing – washable, durable and easy to maintain – no loose insulation fibers to break off and enter the airstreams
- Factory installed, integral line voltage disconnect (non-fused) and onboard 24VAC power
- EISA compliant motor for energy efficiency with open drip-proof design and integral thermal protection
- Two total, MERV 8, 2” pleated, 14”x20” nominal size filters (one for each airstream, two for each core)
- UL tested flammability and smoke generation that meets NFPA 90A and 90B test standards for commercial applications
Available Options:
- Fused disconnect
- Double wall construction
- ECM motor (for best energy efficiency)
|
45EVHB
- Hanging Bracket, Foot Kit
45EVDF
- Rectangular 12" x 8" Flange Kit (2 in kit)
45EVT10
- 10" Round Transition Kit (2 in kit)
FA10-G/FA10-P
- 10” Metal Hood Type Wall Cap
- Galvanized (G) or Paintable (P)
- 1/4” metal screen
VW12x12-G
- 10” Galvanized 12” x 12” Louvered, Flush Mount Rectangle Wall Cap
- 1/2" metal screen
BD10
- 10" Back Draft Damper
- Mechanical "butterfly" design
- Male/Female ends
HE1XINH
 |
- Indoor Fan Powered Packaged Energy Recovery Ventilator
- Typical Airflow Range: 250-925 cfm
- AHRI 1060 Certified Core – One L125-G5
- Direct drive 0.75 hp motors (2)
- Quiet, forward curve blowers (2)
- Available in single or three phase with multiple voltage options
- Horizontal airflow orientation
|
Standard Features:
- Utilizes RenewAire's exceptional static plate energy exchange core
- AHRI certified performance data for efficiency and cross leakage
- Ten year core performance warranty
- Suitable for restroom exhaust
- No liquid water (condensate) or accompanying drain line to deal with - as with many competing brands
- No mounting restrictions - mount overhead, against a wall – vertical or horizontally
- Access doors can be completely and easily removed allowing complete access to all internal components
- Two separate access doors, one for the core, the other for the blower compartment
- Built-in pressure ports with captive plugs allowing cross-core pressure measurement and accurate airflow measurement
- One inch thick dense fiberboard insulation with scrimmed foil facing – washable, durable and easy to maintain – no loose insulation fibers to break off and enter the airstreams
- Factory installed, integral line voltage disconnect (non-fused) and onboard 24VAC power
- EISA compliant motors for energy efficiency with open drip-proof design and integral thermal protection
- Two total, MERV 8, 2" pleated, 20"x20" nominal size filters (one for each airstream)
- UL tested flammability and smoke generation that meets NFPA 90A and 90B test standards for commercial applications
Available Options:
- Fused disconnect
- Double wall construction
- ECM motor(s) (for best energy efficiency)
- Motorized isolation dampers, OA, EA or both airstreams
- Factory mounted Filter Alarms (2)
- Independent Blower Control
FA12-G/FA12-P
- 12" Metal Hood Type Wall Cap
- Galvanized (G) or Paintable (P)
- 1/4" metal screen
BD12
- 12" Back Draft Damper
- Mechanical "buterfly" design
- Male/Female ends
EV450RT
 |
- Outdoor Fan Powered Packaged Energy Recovery Ventilator
- Typical Airflow Range: 200-500 cfm
- AHRI 1060 Certified Core – One L85-G5
- Direct drive 0.6hp (Single Phase) or 0.5hp (Three Phase) motor (1)
- Available in single or three phase with multiple voltage options
- Available airflow orientations: RTV, RTF, RTR, RTC, RTH
|
Standard Features:
- Utilizes RenewAire's exceptional static plate energy exchange core
- AHRI certified performance data for efficiency and cross leakage
- Ten year core performance warranty
- Suitable for restroom exhaust
- No liquid water (condensate) or accompanying drain line to deal with - as with many competing brands
- One piece, watertight roof with airtight outdoor exposure compression seals - swings up, allowing easy access to all internal components
- Screened weatherhoods to exclude birds and animals
- Low velocity intake hood with aerodynamic rain excluder
- G90 galvanized, 20-gauge steel construction with lapped corners and zinc plated screw fasteners
- One inch thick dense fiberboard insulation with scrimmed foil facing – washable, durable and easy to maintain – no loose insulation fibers to break off and enter the airstreams
- Factory installed, integral line voltage disconnect (non-fused) and onboard 24VAC power
- EISA compliant motor for energy efficiency with open drip-proof design and integral thermal protection
- Two total, MERV 8, 2" pleated, 14"x20" nominal size filters (one for each airstream)
- UL tested flammability and smoke generation that meets NFPA 90A and 90B test standards for commercial applications
Available Options:
- Fused disconnect
- Double wall construction
- ECM motor (for best energy efficiency)
- Exterior paint – white standard – custom colors available
- Rooftop adaptor transition paint – white standard – custom colors available
45RTRF
- Rooftop Adaptor for RTR and RTF airflow orientations
45RTCH
- Rooftop Adaptor for RTC and RTH airflow orientations
45Curb
45EVCC
- EV450RT Tie Down Clip Kit
HE1XINV
 |
- Indoor Fan Powered Packaged Energy Recovery Ventilator
- Typical Airflow Range: 250-925 cfm
- AHRI 1060 Certified Core – One L125-G5
- Direct drive 0.75 hp motors (2)
- Quiet, forward curve blowers (2)
- Available in single or three phase with multiple voltage options
- Vertical airflow orientation
|
Standard Features:
- Utilizes RenewAire's exceptional static plate energy exchange core
- AHRI certified performance data for efficiency and cross leakage
- Ten year core performance warranty
- Suitable for restroom exhaust
- No liquid water (condensate) or accompanying drain line to deal with - as with many competing brands
- No mounting restrictions - mount overhead, against a wall – vertical or horizontally
- Access doors can be completely and easily removed allowing complete access to all internal components
- Two separate access doors, one for the core, the other for the blower compartment
- Built-in pressure ports with captive plugs allowing cross-core pressure measurement and accurate airflow measurement
- One inch thick dense fiberboard insulation with scrimmed foil facing – washable, durable and easy to maintain – no loose insulation fibers to break off and enter the airstreams
- Factory installed, integral line voltage disconnect (non-fused) and onboard 24VAC power
- EISA compliant motors for energy efficiency with open drip-proof design and integral thermal protection
- Two total, MERV 8, 2" pleated, 20"x20" nominal size filters (one for each airstream)
- UL tested flammability and smoke generation that meets NFPA 90A and 90B test standards for commercial applications
Available Options:
- Fused disconnect
- Double wall construction
- ECM motor(s) (for best energy efficiency)
- Motorized isolation dampers, OA, EA or both airstreams
- Factory mounted Filter Alarms (2)
- Independent Blower Control
FA12-G/FA12-P
- 12" Metal Hood Type Wall Cap
- Galvanized (G) or Paintable (P)
- 1/4" metal screen
BD12
- 12" Back Draft Damper
- Mechanical "buterfly" design
- Male/Female ends
|
|
